x

HOW CAN WE HELP YOU?

    Contact Information

    Head Office (Darwin)

    Perth

    Brisbane / PNG

    Products

    AUSTRALIAN

    OWNED AND OPERATED

    Pneutorque Wrenches

    Features

    pneutorque.jpg

    Standard Series
    Based on the original Pneutorque, the ‘Standard Series’ Range is a direct result of over 30 years of refinement and development necessary to keep pace with industry’s requirements today.

    In use on many thousands of applications worldwide, Pneutorque Wrenches continue to represent the foundation of Norbar’s powered tool range.

    • Models available for almost every bolting application, 200Nm to 81,000Nm.
    • Reversible.
    • Available with manual or automatic two speed gearbox to reduce bolt rundown time.
    • Low operator fatigue – quiet, no impacting or pulsing.
    • Repeatability of ±5%.

    Small Diameter Series
    These Pneutorque models share the same features as the ‘Standard’ series, but have a higher torque output for a given gearbox diameter.

    • Reduced diameter allows improved access.
    • High torque output – up to 5500Nm. All torques can be achieved at less than 6 bar.
    • Reversible, Pneutorques can be used for tightening and untightening.
    • Reaction plate can slide on the spline to allow for sockets of various lengths.
    • Annular transducers are available.
    • Optional manual or automatic two speed gearboxes reduce bolt rundown time.

    Standard Series

    Model Square Drive
    (inches)
    Part Code Range Free Speed Major Ø
    (mm)
    Overall Length
    (mm)
    Weight
    (kg)*
    Nm lb.ft,/b> Single Speed Two Speed
    1 3/4 16031 160-680 120-500 30 150 108 365 12.8
    1 1 16011 160-680 120-500 30 150 108 370 12.8
    1A 1 16097 270-1200 200-900 15 75 108 370 13.3
    2 1 16013 515-1700 380-1250 9 45 108 370 13.3
    5 1 16015 880-3400 650-2500 5 25 119 420 16.5
    6 1 1/2 16017 880-3400 650-2500 5 25 119 426 16.5
    7 1 1/2 16066 1762-6000 1300-4500 2.5 12.5 144 426 26
    9 1 1/2 16072 MTS 2710-9500 2000-7000 9 181 515 36.2
    11 2 1/2 16046 MTS 4400-17000 3250-12500 6 212 615 55.4
    13 2 1/2 16052 MTS 13550-47000 10000-35000 1.5 315 695 112.6
    14 3 1/2 16045 MTS 22375-81500 16500-60000 1 315 765 133.3

    Weight including reaction plate. 

    Air Consumption: 40 ft³/min, 19 l/s (at 70 psi).

    Notes:

    PT1 to PT9 are available with Manual Two Speed (MTS) or Auto Two Speed (AUT). 

    The length increases by 83mm, and the weight by 3.5kg. 

    PT9 to PT14 are supplied as standard with Manual Two Speed Gearbox, but are also available as single speed.

    Small Diameter Series

    Model Square Drive
    (inches)
    Part Code Range Free Speed¹ Major Ø
    (mm)
    Overall Length
    (mm)
    Weight
    (kg)*
    Nm lb.ft
    2700 1 18027 880 – 2700 650 – 2000 5 108 434 22.3
    18027 AUT 25 505 20
    18027 MTS 25 522 20
    5500 1 1/2 18028 1200 – 5500 885 – 4000 2.5 119 510 22.3
    18028 AUT 12 580 25.8
    18028 MTS 12 594 25.8

    *Weight including reaction plate. 
    ¹Speed at maximum air pressure and in high gear where applicable. 
    Air Consumption: 40 ft³/min, 19 l/s (at 70 psi).

    Category:

    Enquire Now

      DESCRIPTION

      Description

      pneutorque.jpg

      Standard Series
      Based on the original Pneutorque, the ‘Standard Series’ Range is a direct result of over 30 years of refinement and development necessary to keep pace with industry’s requirements today.

      In use on many thousands of applications worldwide, Pneutorque Wrenches continue to represent the foundation of Norbar’s powered tool range.

      • Models available for almost every bolting application, 200Nm to 81,000Nm.
      • Reversible.
      • Available with manual or automatic two speed gearbox to reduce bolt rundown time.
      • Low operator fatigue – quiet, no impacting or pulsing.
      • Repeatability of ±5%.

      Small Diameter Series
      These Pneutorque models share the same features as the ‘Standard’ series, but have a higher torque output for a given gearbox diameter.

      • Reduced diameter allows improved access.
      • High torque output – up to 5500Nm. All torques can be achieved at less than 6 bar.
      • Reversible, Pneutorques can be used for tightening and untightening.
      • Reaction plate can slide on the spline to allow for sockets of various lengths.
      • Annular transducers are available.
      • Optional manual or automatic two speed gearboxes reduce bolt rundown time.

      Standard Series

      Model Square Drive
      (inches)
      Part Code Range Free Speed Major Ø
      (mm)
      Overall Length
      (mm)
      Weight
      (kg)*
      Nm lb.ft,/b> Single Speed Two Speed
      1 3/4 16031 160-680 120-500 30 150 108 365 12.8
      1 1 16011 160-680 120-500 30 150 108 370 12.8
      1A 1 16097 270-1200 200-900 15 75 108 370 13.3
      2 1 16013 515-1700 380-1250 9 45 108 370 13.3
      5 1 16015 880-3400 650-2500 5 25 119 420 16.5
      6 1 1/2 16017 880-3400 650-2500 5 25 119 426 16.5
      7 1 1/2 16066 1762-6000 1300-4500 2.5 12.5 144 426 26
      9 1 1/2 16072 MTS 2710-9500 2000-7000 9 181 515 36.2
      11 2 1/2 16046 MTS 4400-17000 3250-12500 6 212 615 55.4
      13 2 1/2 16052 MTS 13550-47000 10000-35000 1.5 315 695 112.6
      14 3 1/2 16045 MTS 22375-81500 16500-60000 1 315 765 133.3

      Weight including reaction plate. 

      Air Consumption: 40 ft³/min, 19 l/s (at 70 psi).

      Notes:

      PT1 to PT9 are available with Manual Two Speed (MTS) or Auto Two Speed (AUT). 

      The length increases by 83mm, and the weight by 3.5kg. 

      PT9 to PT14 are supplied as standard with Manual Two Speed Gearbox, but are also available as single speed.

      Small Diameter Series

      Model Square Drive
      (inches)
      Part Code Range Free Speed¹ Major Ø
      (mm)
      Overall Length
      (mm)
      Weight
      (kg)*
      Nm lb.ft
      2700 1 18027 880 – 2700 650 – 2000 5 108 434 22.3
      18027 AUT 25 505 20
      18027 MTS 25 522 20
      5500 1 1/2 18028 1200 – 5500 885 – 4000 2.5 119 510 22.3
      18028 AUT 12 580 25.8
      18028 MTS 12 594 25.8

      *Weight including reaction plate. 
      ¹Speed at maximum air pressure and in high gear where applicable. 
      Air Consumption: 40 ft³/min, 19 l/s (at 70 psi).

      Reviews

      There are no reviews yet.

      Be the first to review “Pneutorque Wrenches”

      Your email address will not be published. Required fields are marked *

      Download Our Capability Statement

      LinkedIn
      Winnellie Group
      4.8
      Based on 22 reviews
      powered by Google
      Jutta Tillery
      Jutta Tillery
      14:34 02 Apr 22
      Excellent customer service, kept us updated throughout the delivery process really looking forward to doing business with Waltan Tools again soon
      Daniel and Scott
      Daniel and Scott
      12:02 29 Jun 21
      We have done business with Winnellie Hydraulics on numerous occasions and find them to always be nothing but professional, honest and reliable.Their customer service is excellent and they are always a pleasure to work with. We would highly recommend Winnellie Hydraulics and we look forward to continuing business with Max and the team in the up and coming future.
      Damien Pedersen
      Damien Pedersen
      06:23 15 Feb 21
      Winnellie Hydraulics are up most professional and I am always impressed with the service offered and provided. The team at Winnellie Hydraulics are highly skilled, innovative and ever reliable. They continue to be the Territory’s leading service specialists within the fields of the hydraulic and pneumatic services and solutions. The team have a broad range of knowledge in hydraulic, pneumatic, hose management and products across a extensive range of divisions. The team at Winnellie Hydraulics are easy to work with and really appreciate their customers and strive for continuous business improvement.
      Rob North
      Rob North
      07:53 10 Feb 21
      Efficient, professional and dedicated. The team at Winnellie Hydraulics are a pleasure to work with and are customer service specialists.Max and the team have taken on many challenges to assist with emergent scopes at our onshore facility in Darwin. They go above and beyond to meet the timeline required without missing a beat on quality.I highly recommend dealing with them and look forward to future business.Thanks guys
      Sonia Harvey
      Sonia Harvey
      05:25 08 Feb 21
      The team at Winnellie Hydraulics are customer service specialists! They certainly go above and beyond to meet the needs of customers and are a great local service and supply business. I highly recommend dealing with them.
      Darren Steele
      Darren Steele
      02:59 07 Feb 21
      For all your Hydraulic & Pneumatic needs, Winnellie Hydraulics has you covered.Max and the team run a great operation that supports the Oil & Gas and Mining industries.With great brands supporting them, they are truly the one stop shop for all your engineering needs.
      Dipak Nand
      Dipak Nand
      23:06 04 Feb 21
      The team at Winnellie hydraulics, is great to work with, they understand our priority and service delivery to our Defence clients, No job too small or big and delivering of high quality products and service. Also really easy to deal with in regards to faults/ warranty and SME service . Highly recommended to use.
      Darren Upton
      Darren Upton
      22:54 04 Feb 21
      Winnellie Hydraulics are a Parker PPD for the NT which means they have full access to all Parkers Hannifin products & our local Engineering team in Australia who can work with Winnellie on any projects where clients needs are meet using Parkers products & their insulation experience
      Ben Tilbrook
      Ben Tilbrook
      07:35 04 Feb 21
      Outstanding commitment to their customers, in my experience there isn’t anything that is too hard for this mob. Always prepared to find solutions to their customers now matter how big or small the request. A great family business who take pride in providing product and service.
      See All Reviews
      js_loader
      Call Now Button